interchangeSKF NA 4915 cylindrical roller bearings guide | ||||||||
|---|---|---|---|---|---|---|---|---|
| S | B | F | d | s | C | D | Fw | |
| NA 4915 | - | 30 mm | 85 mm | 75 mm | 1.5 mm | - | 105 mm | - |
| NA 4915 | - | 30 mm | 85 mm | 75 mm | 1.5 mm | - | 105 mm | - |
| NA 4915 | - | - | - | 75 mm | - | 30 mm | 105 mm | 85 mm |
| NA 4915 | - | 30 mm | 85 mm | 75 mm | - | 30 mm | 105 mm | - |
| NA 4915 | 1,5 mm | 30 mm | - | 75 mm | - | 30 mm | 105 mm | 85 mm |
| NA 4915 | - | 30 mm | 85 mm | 75 mm | 1.5 mm | - | 105 mm | - |
| NA 4915 | - | 30 mm | 85 mm | 75 mm | 1.5 mm | - | 105 mm | - |
| NA 4915 | - | - | - | 75 mm | - | 30 mm | 105 mm | 85 mm |
| NA 4915 | - | 30 mm | 85 mm | 75 mm | - | 30 mm | 105 mm | - |
| NA 4915 | 1,5 mm | 30 mm | - | 75 mm | - | 30 mm | 105 mm | 85 mm |
| Recommended tightening torque for set screw | 3.7 Nm |
| A1 | 21 mm |
| H2 | 70 mm |
| G | R1/8" |
| H | 36.5 mm |
| T max. | 100 °C |
| C0 | 7.88 kN |
| L1 | 21 mm |
| S | 14.3 mm |
| A | 36 mm |
| SKF PNA 12/28 cylindrical roller bearings | Recommended tightening torque for set screw:3.7 Nm; A1:21 mm; H2:70 mm; G:R1/8"; H:36.5 mm; T max.:100 °C; C0:7.88 kN; L1:21 mm; S:14.3 mm; A:36 mm; |
| SKF S7018 CB/P4A angular contact ball bearings | Support Type:Four-Bolt Plummer Bl; Cor - Static Load Rating:186142 lbf; Dimension J:510 mm; Seal Type:Aluminium Triple Lab; Dimension M:230 mm; Bearing Type:Split Cylindrical Ex; Pillow/Plummer Block Style:Split Cylindrical Ho; Bolt Size:4 x M30; Note:This product line wa; Dimension K:130 mm; |
| SKF SILKB6F plain bearings | Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; S:12.7 mm; Designation of housing:FA204-; H:102 mm; A:25.5 mm; s1:15.5 mm; A2:33.3 mm; G:M6x1; B:31 mm; |
| SKF NJ 312 ECPH thrust ball bearings | Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; S:12.7 mm; Designation of housing:FA204-; H:102 mm; A:25.5 mm; s1:15.5 mm; A2:33.3 mm; G:M6x1; B:31 mm; |
| SKF C 3056 K cylindrical roller bearings | Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Tapered hole adapter; Bearing Unit, Type:Pillow Type; B:90; Unit Body Material:Cast Iron; Accessory:No Cover; d:60; Grease Type:Standard Grease; Surface Treatment:No; Pillow Type, Category:Standard; |
| SKF RNAO40x55x20 needle roller bearings | da - Cone Frontface Backing Diameter:3.23 in; a - Effective Center Location3:-0.32 in; T - Bearing Width to Flange:0.5625 in; C1 - Cup Flange Width:0.2500 in; K - Factor7:1.61; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:7130 lbf; G2 - Heat Generation Factor (Rib-Roller End):24; Da - Cup Frontface Backing Diameter:4.80 in; db - Cone Backface Backing Diameter:3.27 in; D:5 in; |
| SKF 61828 deep groove ball bearings | Support Type:Four-Bolt Plummer Bl; Cor - Static Load Rating:186142 lbf; Dimension J:510 mm; Seal Type:Aluminium Triple Lab; Dimension M:230 mm; Bearing Type:Split Cylindrical Ex; Pillow/Plummer Block Style:Split Cylindrical Ho; Bolt Size:4 x M30; Note:This product line wa; Dimension K:130 mm; |
| SKF QJ214MA angular contact ball bearings | Max operating temperature, Tmax:120 °C; Static load, C0:117 kN; Radial clearance class:C3; ra max:2 mm; da min:121 mm; Min operating temperature, Tmin:-20 °C; Brand:NTN; Fatigue limit load, Cu:4.25 kN; f0:14.3; Characteristic cage frequency, FTF:0.41 Hz; |
| SKF 60980 M deep groove ball bearings | Support Type:Four-Bolt Plummer Bl; Cor - Static Load Rating:186142 lbf; Dimension J:510 mm; Seal Type:Aluminium Triple Lab; Dimension M:230 mm; Bearing Type:Split Cylindrical Ex; Pillow/Plummer Block Style:Split Cylindrical Ho; Bolt Size:4 x M30; Note:This product line wa; Dimension K:130 mm; |
| Hot Sell Timken Inch Taper Roller Bearing Hm89449/Hm89410 Set312 | Grease symbol:/5K; Bearing Style:Rubber Sealed; RoHS:6; Size Standards:Metric System; D:35; Preload Mark:C3; Basic Dynamic Load Rating(N):6800; Max. Allowed rpm(rpm):14000; Outer Ring Shape:Flat; Specifications/Environment:Standard / Dust Proo; |
SKF NA 4915 cylindrical roller bearings Video
Insert bearings - NA 4915
d, 75, mm. D, 105, mm. B, 30, mm. F, 85, mm. r1,2, min. 1, mm. s, max. 1.5, mm. Abutment dimensions. da, min. 80, mm. Da, max. 100, mm. ra, max. 1, mm
Needle roller bearings, with machined rings, with ...
Needle roller bearings, with machined rings, with an inner ring - NA 4915 ... NA 4915. Popular item. Dimensions. d, 75, mm. D, 105, mm. B, 30, mm. F, 85, mm
SKF - NA 4915 - Motion Industries
Buy SKF Needle Roller Bearings NA 4915 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
SKF | NA 4915 | Radial Needle Roller Bearing | Applied
Shop SKF NA 4915 at Applied.com, which includes; Radial Bearing Type, 75 mm Inside Diameter, 105 mm Outside Diameter, 30 mm Width
SKF NA 4915 - Needle Roller Bearing - 75 mm ...
Buy SKF NA 4915 - Needle Roller Bearing - 75 mm Bore, 105 mm OD, 30 mm Width, Open: Needle - Amazon.com ✓ FREE DELIVERY possible on eligible
Bearing NA 4915 (SKF) | Size and Specification | Bearings
Needle roller bearings, with machined rings, with an inner ring NA 4915 dimensions and specification